{How to [Light] a Water Heater}
1- Check the pilot light.
2- Make sure there is no leaking gas.
3- Check inside the door panel of your water heater for instructions.
Preparing to Relight the Pilot
1- Set the temperature control setting to the lowest temperature.
2- Locate the regulator valve.
3- Turn the knob to the “Off” position.
4- Determine what style of water heater you have.
5- Collect any necessary lighting materials.
Relighting the Pilot Light
1- Turn the gas valve to the "Pilot" setting and push down on it.
2- Light the pilot burner.
3- Continue holding down the gas valve or control button for 1 minute after the pilot light has been lit.
4- Release the valve knob/control button.
5- Replace the access panels.
6- Reignite the main burner.
7- Set the thermostat to your desired temperature. 👏🏼
No comments:
Post a Comment